Mike J. Gee
New Member
Hi all,
I'm new to this software and also new to this board. But I hope someone could help with an issue I am facing after installation of OBS Studio on my system.
All went well, but on first start I get an Error Message that sounds:
Error - Could not find D3D compiler liberies.
Here is the log, I found according to U're suggestions: (I'm quiet not aware, whether there is missing something on my system or within installation-set)
21:23:59.276: CPU Name: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz
21:23:59.276: CPU Speed: 2999MHz
21:23:59.276: Physical Cores: 4, Logical Cores: 4
21:23:59.276: Physical Memory: 8191MB Total, 5229MB Free
21:23:59.276: Windows Version: 6.1 Build 7601 (revision: 23796; 64-bit)
21:23:59.276: Running as administrator: false
21:23:59.276: Aero is Enabled
21:23:59.280: Portable mode: false
21:23:59.301: OBS 19.0.2 (64bit, windows)
21:23:59.301: ---------------------------------
21:23:59.302: ---------------------------------
21:23:59.303: audio settings reset:
21:23:59.303: samples per sec: 44100
21:23:59.303: speakers: 2
21:23:59.331: ---------------------------------
21:23:59.331: Initializing D3D11...
21:23:59.331: Available Video Adapters:
21:23:59.336: Adapter 1: NVIDIA GeForce GTX 970
21:23:59.336: Dedicated VRAM: 4202954752
21:23:59.336: Shared VRAM: 4026034176
21:23:59.336: output 1: pos={0, 0}, size={1920, 1080}, attached=true
21:23:59.336: output 2: pos={0, -1080}, size={1920, 1080}, attached=true
21:23:59.343: Could not find any D3DCompiler libraries
21:24:07.490: Freeing OBS context data
21:24:07.497: == Profiler Results =============================
21:24:07.497: run_program_init: 8287.2 ms
21:24:07.497: ┣OBSApp::AppInit: 50.38 ms
21:24:07.497: ┃ ┗OBSApp::InitLocale: 3.514 ms
21:24:07.497: ┗OBSApp::OBSInit: 129.376 ms
21:24:07.497: ┣obs_startup: 4.824 ms
21:24:07.497: ┗OBSBasic::OBSInit: 40.847 ms
21:24:07.497: ┣OBSBasic::InitBasicConfig: 0.793 ms
21:24:07.497: ┣OBSBasic::ResetAudio: 3.571 ms
21:24:07.497: ┗OBSBasic::ResetVideo: 36.459 ms
21:24:07.497: obs_hotkey_thread(25 ms): min=0.002 ms, median=0.069 ms, max=0.9 ms, 99th percentile=0.248 ms, 100% below 25 ms
21:24:07.497: audio_thread(Audio): min=0.001 ms, median=0.017 ms, max=0.249 ms, 99th percentile=0.06 ms
21:24:07.497: =================================================
21:24:07.497: == Profiler Time Between Calls ==================
21:24:07.497: obs_hotkey_thread(25 ms): min=24.461 ms, median=24.639 ms, max=24.815 ms, 99.3865% within ±2% of 25 ms (0.613497% lower, 0% higher)
21:24:07.497: =================================================
21:24:07.556: Number of memory leaks: 165
Thnxs a lot, if someone could give me any advice.
Mikel
I'm new to this software and also new to this board. But I hope someone could help with an issue I am facing after installation of OBS Studio on my system.
All went well, but on first start I get an Error Message that sounds:
Error - Could not find D3D compiler liberies.
Here is the log, I found according to U're suggestions: (I'm quiet not aware, whether there is missing something on my system or within installation-set)
21:23:59.276: CPU Name: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz
21:23:59.276: CPU Speed: 2999MHz
21:23:59.276: Physical Cores: 4, Logical Cores: 4
21:23:59.276: Physical Memory: 8191MB Total, 5229MB Free
21:23:59.276: Windows Version: 6.1 Build 7601 (revision: 23796; 64-bit)
21:23:59.276: Running as administrator: false
21:23:59.276: Aero is Enabled
21:23:59.280: Portable mode: false
21:23:59.301: OBS 19.0.2 (64bit, windows)
21:23:59.301: ---------------------------------
21:23:59.302: ---------------------------------
21:23:59.303: audio settings reset:
21:23:59.303: samples per sec: 44100
21:23:59.303: speakers: 2
21:23:59.331: ---------------------------------
21:23:59.331: Initializing D3D11...
21:23:59.331: Available Video Adapters:
21:23:59.336: Adapter 1: NVIDIA GeForce GTX 970
21:23:59.336: Dedicated VRAM: 4202954752
21:23:59.336: Shared VRAM: 4026034176
21:23:59.336: output 1: pos={0, 0}, size={1920, 1080}, attached=true
21:23:59.336: output 2: pos={0, -1080}, size={1920, 1080}, attached=true
21:23:59.343: Could not find any D3DCompiler libraries
21:24:07.490: Freeing OBS context data
21:24:07.497: == Profiler Results =============================
21:24:07.497: run_program_init: 8287.2 ms
21:24:07.497: ┣OBSApp::AppInit: 50.38 ms
21:24:07.497: ┃ ┗OBSApp::InitLocale: 3.514 ms
21:24:07.497: ┗OBSApp::OBSInit: 129.376 ms
21:24:07.497: ┣obs_startup: 4.824 ms
21:24:07.497: ┗OBSBasic::OBSInit: 40.847 ms
21:24:07.497: ┣OBSBasic::InitBasicConfig: 0.793 ms
21:24:07.497: ┣OBSBasic::ResetAudio: 3.571 ms
21:24:07.497: ┗OBSBasic::ResetVideo: 36.459 ms
21:24:07.497: obs_hotkey_thread(25 ms): min=0.002 ms, median=0.069 ms, max=0.9 ms, 99th percentile=0.248 ms, 100% below 25 ms
21:24:07.497: audio_thread(Audio): min=0.001 ms, median=0.017 ms, max=0.249 ms, 99th percentile=0.06 ms
21:24:07.497: =================================================
21:24:07.497: == Profiler Time Between Calls ==================
21:24:07.497: obs_hotkey_thread(25 ms): min=24.461 ms, median=24.639 ms, max=24.815 ms, 99.3865% within ±2% of 25 ms (0.613497% lower, 0% higher)
21:24:07.497: =================================================
21:24:07.556: Number of memory leaks: 165
Thnxs a lot, if someone could give me any advice.
Mikel