How to enable experimental seamless reconnecting (no stopping / starting of the scene if you get disconnected - similar to the "keep recording if live stream stops" option, but without the recording part)
0. Make sure OBS is updated to v0.62b and is not running.
1. Goto %APPDATA%\OBS\profiles and open your profile .ini
2. Under [Publish], add
ExperimentalReconnectMode=1
3. Save your .ini and restart OBS.
Notes:
This is not compatible with delayed streams. With a delay timer of 0, you should reconnect within 1-2 seconds of a disconnection, assuming the streaming service you are using has registered the disconnect. Unfortunately with Twitch, when the connection drops the buffered HLS segments are lost, so a disconnect lasting 2-3 seconds can result in the loss of 10-15 seconds of the stream.
Please report any problems here!
0. Make sure OBS is updated to v0.62b and is not running.
1. Goto %APPDATA%\OBS\profiles and open your profile .ini
2. Under [Publish], add
ExperimentalReconnectMode=1
3. Save your .ini and restart OBS.
Notes:
This is not compatible with delayed streams. With a delay timer of 0, you should reconnect within 1-2 seconds of a disconnection, assuming the streaming service you are using has registered the disconnect. Unfortunately with Twitch, when the connection drops the buffered HLS segments are lost, so a disconnect lasting 2-3 seconds can result in the loss of 10-15 seconds of the stream.
Please report any problems here!
