Question / Help Encoding overloaded with AMD graphic card

[MaxyBlack]

Hi Guys!
I have small problem with my OBS. I'm trying to setup everything so i can play and record at the same time but don't lose graphic quality of game.
What i have inside
MSI Radeon R9 390X 8192MB 512bit
Intel i5-6600 3.30GHz 6MB
2 x HyperX 8GB 1600MHz Fury Blue CL10

I was thinking that with good setup i will be able to record game without any problem but i was wrong.
Since i switched my settings to those : http://i.imgur.com/yUkvLQk.png
I see Encoding overloaded 5 seconds after i start recording.
FPS in game are set to 60 same in OBS.
If you guys have any suggestion pleas tell me.

 

[Harold]

OBS log missing.

 

[MaxyBlack]

https://www.dropbox.com/s/9lgld0uko337xgn/2016-08-17 20-39-38.txt?dl=0

 

[Harold]

Try the next older log, that one is missing profiler data.

 

[MaxyBlack]

https://www.dropbox.com/s/8ly67lz4yccq5m1/2016-08-17 20-22-41.txt?dl=0
https://www.dropbox.com/s/7dkb7ebmo7o8xhj/2016-08-17 20-22-52.txt?dl=0
https://www.dropbox.com/s/6x5ed8jg3mcl1kd/2016-08-17 20-30-59.txt?dl=0

 

[Harold]

Does the problem persist with a single source in a dedicated scene collection?
Have you installed the latest drivers from AMD's site?

 

[MaxyBlack]

Yes, i'm trying to record only with one source which is overwatch

as you can see on this ss : http://i.imgur.com/8CKxc0Y.png
i have latest drivers.

 

[Harold]

There's a 16.8.2 hotfix version out

That screenshot shows that overwatch isn't running.

 

[Suslik V]

And try to up bitrate x25 times.

 

[MaxyBlack]

There's a 16.8.2 hotfix version out

That screenshot shows that overwatch isn't running.

3 sec after clicking start recording i see this error, and when i click to stop... i can't

 

[MaxyBlack]

After installing latest drivers i still have this issue
on bitrate 1000 and 25000

And try to up bitrate x25 times.

I changed and still nothing

 

[Harold]

Looks like the settings you're using may not be compatible with the mediafoundation encoder.
Have you tried using simple output mode, indistinguishable recording quality, and either software low cpu use or your hardware encoder?

Also, plays.tv is known to interfere.

 

[MaxyBlack]

Looks like the settings you're using may not be compatible with the mediafoundation encoder.
Have you tried using simple output mode, indistinguishable recording quality, and either software low cpu use or your hardware encoder?

Also, plays.tv is known to interfere.

Thx for all your help, it looks like i will have to stick with simple output.