Did it work before installing the current driver (iGPU)? It was causing issues on another system today & had to be removed. Not sure if that's the case here, yet.
Get a video source in that Scene.
Sample-rate mismatches should be fixed.
Try again
15:16:29.454: - scene 'Scene':
15:16:29.454: - source: 'Audio Input Capture' (wasapi_input_capture)
15:16:29.454: ------------------------------------------------
15:16:29.473: WASAPI: Device 'Microphone (High Definition Audio Device)' [44100 Hz] initialized (source: Mic/Aux)
15:16:29.475: WASAPI: Device 'Microphone (High Definition Audio Device)' [44100 Hz] initialized (source: Audio Input Capture)
15:16:29.481: WASAPI: Device '2 - SAMSUNG (AMD High Definition Audio Device)' [48000 Hz] initialized (source: Desktop Audio)
15:16:43.368: ---------------------------------
15:16:43.368: video settings reset:
15:16:43.368: base resolution: 1920x1080
15:16:43.368: output resolution: 1280x720
15:16:43.368: downscale filter: Bicubic
15:16:43.368: fps: 30/1
15:16:43.368: format: NV12
15:16:43.368: YUV mode: Rec. 709/Partial
15:16:43.368: NV12 texture support enabled
15:16:43.368: P010 texture support not available
15:16:43.375: Audio monitoring device:
15:16:43.375: name: Default
15:16:43.375: id: default
15:16:43.375: Created profile 'Troubleshoot' (clean, Troubleshoot)
15:16:43.375: ------------------------------------------------
15:16:50.771:
15:16:50.771: ==== Auto-config wizard testing commencing ======
15:16:58.042: ---------------------------------
15:16:58.042: video settings reset:
15:16:58.042: base resolution: 1920x1080
15:16:58.042: output resolution: 1920x1080
15:16:58.042: downscale filter: Bicubic
15:16:58.042: fps: 60/1
15:16:58.042: format: NV12
15:16:58.042: YUV mode: Rec. 709/Partial
15:16:58.043: NV12 texture support enabled
15:16:58.043: P010 texture support not available
15:16:58.089:
15:16:58.089: ==== Auto-config wizard testing stopping ========
