Thercon Jair
New Member
I was just doing test recordings with 601/709/Partial/Full settings, and it seems to me that there must be a bug with the YUV Color Range. The settings appear to be reversed: partial gives full color range while full gives partial color range.
I did some test recordings and with 709/Full color range the blacks seemed crushed. So I changed to 601/partial color range and it seemed much better scaled.
So I tested with a greyscale chart confirming my suspicion: when using full settings the lowest 15 shades are the same, however, when using partial the lowest 15 are distinguishable. This was tested on both factory calibrated VA and IPS panels.
Link to test samples: https://imgur.com/a/gsOkb
I did some test recordings and with 709/Full color range the blacks seemed crushed. So I changed to 601/partial color range and it seemed much better scaled.
So I tested with a greyscale chart confirming my suspicion: when using full settings the lowest 15 shades are the same, however, when using partial the lowest 15 are distinguishable. This was tested on both factory calibrated VA and IPS panels.
Link to test samples: https://imgur.com/a/gsOkb