Audio starts normally during a stream, and then goes to a muffled-like after 30 secs.

[Shox]

Hey guys, so the stream starts normally, everything working fine, i enter a game, sounds works fine for about 30 secs, and then becomes muffled-like.
This started happening just a couple days ago, either after a new obs or win 10 update. Before that i had no issues.
Here is the log: https://obsproject.com/logs/UAoevIbNaySxWKaR

 

[carlmmii]

19:27:18.669: [DShow Device: 'Video Capture Device'] settings updated: 
19:27:18.669:     video device: Logitech Webcam C930e
19:27:18.669:     video path: \\?\usb#vid_046d&pid_0843&mi_00#9&38e7beba&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
19:27:18.669:     resolution: 1920x1080
19:27:18.669:     flip: 0
19:27:18.669:     fps: 30.00 (interval: 333333)
19:27:18.669:     format: MJPEG
19:27:18.707:     using video device audio: no
19:27:18.707:     audio device: Microphone (RODE NT-USB)
19:27:18.707:     sample rate: 44100
19:27:18.707:     channels: 2
19:27:18.707:     audio type: Capture

Take the rode microphone off your camera's audio.

 

[Shox]

19:27:18.669: [DShow Device: 'Video Capture Device'] settings updated:
19:27:18.669:     video device: Logitech Webcam C930e
19:27:18.669:     video path: \\?\usb#vid_046d&pid_0843&mi_00#9&38e7beba&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
19:27:18.669:     resolution: 1920x1080
19:27:18.669:     flip: 0
19:27:18.669:     fps: 30.00 (interval: 333333)
19:27:18.669:     format: MJPEG
19:27:18.707:     using video device audio: no
19:27:18.707:     audio device: Microphone (RODE NT-USB)
19:27:18.707:     sample rate: 44100
19:27:18.707:     channels: 2
19:27:18.707:     audio type: Capture

Take the rode microphone off your camera's audio.

Hey, the thing is i had it like that since i started using OBS 5 months ago and it never caused any trouble.
I will give your advice a go of course, but i wanted to ask if you have any other ideas perhaps if this doesn't do it?
I got another log directly when i was operating OBS.

 

[Shox]

19:27:18.669: [DShow Device: 'Video Capture Device'] settings updated:
19:27:18.669:     video device: Logitech Webcam C930e
19:27:18.669:     video path: \\?\usb#vid_046d&pid_0843&mi_00#9&38e7beba&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
19:27:18.669:     resolution: 1920x1080
19:27:18.669:     flip: 0
19:27:18.669:     fps: 30.00 (interval: 333333)
19:27:18.669:     format: MJPEG
19:27:18.707:     using video device audio: no
19:27:18.707:     audio device: Microphone (RODE NT-USB)
19:27:18.707:     sample rate: 44100
19:27:18.707:     channels: 2
19:27:18.707:     audio type: Capture

Take the rode microphone off your camera's audio.

Hey, so I tried your solution and it didn't help much unfortunatelly, i'm still getting the same issue with the audio. Any other suggestions? :/