Question / Help Antelope Audio Interfaces and OBS, not picking up mic

[AudibleSilence]

Hello all,

I'm a sound engineer that wanted to get into streaming a bit. I have an Antelope Zen Tour that I wanted to use in OBS Studio, but I cannot get it to pick up sound from the interface. I've ensured that my interface is set to 44.1kHz and that the mic input is being routed to the correct USB REC channels. I also made sure that the OBS is set to the correct I/O.

The desktop audio that's routed through the Zen is being picked up properly, but the mic input is not. Does anyone have any ideas as to what might be happening? Thanks!

 

[JakeMartins]

BUMP

I have an Antelope Audio Discrete 8 that is showing audio inside of the Windows audio devices but is not showing any audio inside of OBS. Here's a screenshot showing the audio and where it's metering:

https://drive.google.com/file/d/1XDQLVWJ3xpO9zSKFLOI_DTfdbHctqZ-z/view?usp=sharing

 

[arturdzivia]

I have the same problem. Can anyone help?

 

[PaulMD]

Hi guys

I can suggest using VoiceMeeter in order to run through the ASIO driver. You will then be able to get input audio into OBS (use VoiceMeeter as the input device)

Hope this helps :)