Hi, I run a 144hz + 60hz monitor setup where gaming is on the 144hz and the other is on the 60hz. Theres a bug with win10 if you have 2 monitors of different hz it will lower the hz of the 144hz to 60hz. This is what I think may cause the issue, however I did NOT have this issue prior to these nvidia updates.
Here's what happens.
When I stream and record, sometimes a little while in to the video screentear starts to happen. Sometimes its super major other times its very little. I stream TF2 using gamecapture on global source and have been using this setup for years with no problems what so ever. I also stream to youtube.
The screentear happens less when I have less stuff on my second monitor open (the 60hz) but this has not been consistent. and I have not been able to prove it.
Here are my settings:
Encoder settings https://gyazo.com/88e4d6e20a22979011bc8a6406e319e6
Video settings: https://gyazo.com/276f30d30c978eae0fc5e87e84502925
Advanced settings: https://gyazo.com/217dbf9f6c74fda4e7b16b70a0939ad1
------------------
System Information
------------------
Time of this report: 6/29/2016, 19:47:28
Machine name: HIPC
Operating System: Windows 10 Home 64-bit (10.0, Build 10586) (10586.th2_release_sec.160527-1834)
Language: Norwegian Bokmål (Regional Setting: Norwegian Bokmål)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z170X-Gaming 3
BIOS: F5h
Processor: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (8 CPUs), ~4.0GHz
Memory: 16384MB RAM
Available OS Memory: 16334MB RAM
Page File: 9350MB used, 9414MB available
Windows Dir: C:\Windows
DirectX Version: 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.10586.0000 64bit Unicode
---------------
Display Devices
---------------
Card name: NVIDIA GeForce GTX 970
If any other information is needed please let me know.
This worked just fine prior to the driver updates from nvidia
Here's what happens.
When I stream and record, sometimes a little while in to the video screentear starts to happen. Sometimes its super major other times its very little. I stream TF2 using gamecapture on global source and have been using this setup for years with no problems what so ever. I also stream to youtube.
The screentear happens less when I have less stuff on my second monitor open (the 60hz) but this has not been consistent. and I have not been able to prove it.
Here are my settings:
Encoder settings https://gyazo.com/88e4d6e20a22979011bc8a6406e319e6
Video settings: https://gyazo.com/276f30d30c978eae0fc5e87e84502925
Advanced settings: https://gyazo.com/217dbf9f6c74fda4e7b16b70a0939ad1
------------------
System Information
------------------
Time of this report: 6/29/2016, 19:47:28
Machine name: HIPC
Operating System: Windows 10 Home 64-bit (10.0, Build 10586) (10586.th2_release_sec.160527-1834)
Language: Norwegian Bokmål (Regional Setting: Norwegian Bokmål)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z170X-Gaming 3
BIOS: F5h
Processor: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (8 CPUs), ~4.0GHz
Memory: 16384MB RAM
Available OS Memory: 16334MB RAM
Page File: 9350MB used, 9414MB available
Windows Dir: C:\Windows
DirectX Version: 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
DxDiag Version: 10.00.10586.0000 64bit Unicode
---------------
Display Devices
---------------
Card name: NVIDIA GeForce GTX 970
If any other information is needed please let me know.
This worked just fine prior to the driver updates from nvidia