VAPS - Volume Automation Per Scene v1.0 by khaver

Reads a text  file of scene  names  with audio  automation  parameters for each
audio source in each scene.

With the checkbox  unchecked, create a scene  list text  file in "Scene List to
Save" by "Browsing" to a folder and enter a file name.  One by one, select each
scene in your Scenes dock and  adjust the audio  volume sliders  for each audio
source as desired.  Once all the levels are set, click the  "Save current scene
with audio sources and levels to list" button. Do this for every scene in which
you want to automate the audio sources levels.

If you only need the audio level  changes to be simple "cuts", then you can use
the  scene  list  file as-is (default is a 0 ms  duration  automation  change).
"Browse" for and select the scene list file in "Scene List to Load".  Check the
"Load scene list and enable  automation" box, and the scene list file will load
and the automation will start. To stop automation and show the script settings,
uncheck the "Load scene list and enable automation" box.

To adjust  the automation  parameters of your new  scene or loaded  scene list,
click the "Edit new list file" or "Edit loaded list file" button.  Your default
text editor will open  with the scene list file open.  Below is a sample of the
scene list text file format.


Slide Screen;Camera A|-inf dB|0;Camera B|-inf dB|0;Microphone|-inf dB|0
Announcements;Camera A|-inf dB|0;Camera B|-inf dB|0;Microphone|0.0 dB|0
Sermon;Camera A|0.0 dB|0;Camera B|-inf dB|0;Microphone|-inf dB|0
Sermon Wide;Camera B|0.0 dB|0;Camera A|0.0 dB|0;Microphone|-inf dB|0
Sanctuary;Camera B|-12.0 dB|0;Camera A|-12.0 dB|0;Microphone|-inf dB|0


Each line  is one scene  with all it's audio sources.  Semicolons  separate the
scene name  (first on each line)  and audio  sources.  Audio source  automation
parameters are separated by a "|".  The first audio source  parameter is the dB
level. If you need to edit these, the format shown must be followed. Full on is
"0.0 dB"  (you don't actually  need the "dB", but  it makes it easier to read).
Full  off is "-inf dB".  And levels  between are negative  numbers.  The second
audio  source   parameter  is  the  duration  of  the  audio  level  change  in
milliseconds.

Once  you've made the desired  changes, save the  file from  your text  editor.
"Browse" for and select the scene list file in "Scene List to Load".  Check the
"Load scene list and enable  automation" box, and the scene list file will load
and the automation will start.

Note:	Global Audio Sources can not be automated with this script.
		Only tested on Windows 10.